Manara Medicals

saudi arabia

Russia TOR Vm Transparent Matrice Strip Rolls consists of a transparent strips that adapts to the surface of the tooth to be restored, reproducing its anatomical contours, and replacing the missing wall or walls while the restoration is being performed, thus transforming a composite cavity into a simple cavity for easy restoration.
It is made of transparent polyester, especially indicated for light-cured composite materials. The matrix strip is highly resistant and does not tear under tension.
Transparent matrix roll with a length of 10 meters, which is available in two widths: 8mm and 10mm. Transparent Strips easily pass through contact areas between the teeth.
<ul>
<li>No. 1.240 - 8mm wide, 10m length</li>
<li>No. 1.241 - 10mm wide, 10m length</li>
<li>No. 1.244 - 8mm wide, 10m length</li>
<li>No. 1.245 - 10mm wide, 10m length</li>
</ul>
INDICATIONs :
<ul>
<li>Used to prevent composite from adhering to the adjacent teeth.</li>
<li>The matrix bands are used in Class II restorations.</li>
<li>Used to support and give form to the restoration during its placement and hardening.</li>
<li>When used in the labial surface build-up helps in achieving the desired esthetic anatomic contour.</li>
<li>Excellent labial surface finish.&nbsp;</li>
</ul>

TOR VM Transparent Matrix Striproll

<h5 style="margin-left:0px;"> Fixing Wooden Wedges thin, short (white) </h5>
100 pcs

TOR VM Fixing Wooden Wedges

TOR VM Slot Ring
WARNING!!! When operating with ring: 1) make sure of integrity of the ring and absence of rust on it; 2) avoid high-speed opening; 3) open the ring for width not more than 10 - 12 mm; 4) open the ring for necessary width outside the mouth before placing it on a tooth. &nbsp;

<h1 style="margin-left:0px;"><ins>CLEANING AND STERILIZATION INSTRUCTIONS:</ins> 1) Submerge instruments in cleaning agent solution with neutral pH for 20 min; 2) Rinse the instruments thoroughly with purified water for 3-5 min; 3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions. WARNING!!! 1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid; 2) Do not keep instruments in liquid medium for more than 3 hours.&nbsp;</h1>

TOR VM Slot Ring

TOR VM Slot Springclip
<ins>CLEANING AND STERILIZATION INSTRUCTIONS:</ins> 1) Submerge instruments in cleaning agent solution with neutral pH for 20 min; 2) Rinse the instruments thoroughly with purified water for 3-5 min; 3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions. WARNING!!! 1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid; 2) Do not keep instruments in liquid medium for more than 3 hours.&nbsp;

TOR VM Slot Springclip

Plastic Fixing Wedges non-transparent
80 pcs.
thin wedges 50 pcs.
medium wedges 30 pcs.

TOR VM Non-Transparent Plastic Fixing Wedges

Strips for Contouring (contouring / finishing)&nbsp;

TOR VM Finishing Strips

Kit of Molar Transparent Contoured Matrices 60 pcs. 
 • shape 1 (one central ledge)15 pcs. 
• shape 2 (two central ledges)15 pcs. 
• shape 3 (right ledge)15 pcs. 
• shape 4 (left ledge)15 pcs. 
Kit of Premolar Transparent Contoured Matrices 60 pcs. 
• shape 1 (one central ledge)15 pcs. 
• shape 2 (two central ledges)15 pcs. 
• shape 3 (right ledge)15 pcs. 
• shape 4 (left ledge)15 pcs.

Transparent Contoured Matrices Combined with Clamp for Premolars/Molars (16 pcs)
• shape 1 (one central ledge)3 pcs. • shape 2 (two central ledges)3 pcs. • shape 3 (right ledge)5 pcs. • shape 4 (left ledge)5 pcs.&nbsp;
Transparent Contoured Matrices Combined with Clamp for Premolars and Molars (32 pcs)&nbsp;
For Molars:
• shape 1 (one central ledge)3 pcs. • shape 2 (two central ledges)3 pcs. • shape 3 (right ledge)5 pcs. • shape 4 (left ledge)5 pcs.&nbsp;
For Premolars:
• shape 1 (one central ledge)3 pcs. • shape 2 (two central ledges)3 pcs. • shape 3 (right ledge)5 pcs. • shape 4 (left ledge)5 pcs.

TOR VM Transparent Matrices Kit

<h5 style="margin-left:0px;"> N 1.320</h5>
<h5 style="margin-left:0px;">Saddle Metal Matrices.18 pcs </h5>
small № 1.311(1) - 6 pcs., medium № 1.312(1) - 6 pcs., large № 1.313(1) - 6 pcs., ring № 1.033 - 1 pc. Matrices are available of two thicknesses - 0,050 mm and 0,035 mm. &nbsp;

TOR VM Saddle Metal Matrices Kit

<h5 style="text-align:start;">Fixing Wooden Wedges 200 pcs. </h5>
• white (thin, short) - 50 pcs. • yellow (thin, long) - 50 pcs. • blue (medium, short)- 50 pcs. • pink (medium, long) - 50 pcs.&nbsp;

TOR VM Fixing Wooden Wedges Kit

<h3 style="text-align:start;">Woodpecker LED B Cordless LED curing light</h3>
Features of the LED B. wireless curing light:
<ul>
<li>The Woodpecker LED B light is a light curing light with LED technology</li>
<li>Cable-free</li>
<li>Lithium battery:</li>
<ul>
<li>Battery model: ICR18650.</li>
<li>Volts and capacity: 3.7V/200mAh.</li>
<li>Adapter input: 100V to 240B - 50Hz/60Hz.</li>
<li>Battery without memory effect</li>
</ul>
<li>Regarding the light of the light-curing lamp:</li>
<ul>
<li>Light source: blue light.</li>
<li>Light wave: 420nm to 480 nm.</li>
<li>Light intensity: 100mW/cm</li>
<li>It has four modes of working time of 5, 10, 15 and 20 seconds</li>
<li>Power 1000 mW/cm2 - 1700mW/cm2.</li>
</ul>
<li>Ergonomic, lightweight and easy to clean.</li>
<li>Dimensions: 31mm x 34mm x 260mm.</li>
<li>The cleaning of the light-curing lamp can be sterilised in an autoclave under high temperature and pressure.</li>
</ul>
Product information:
<ul>
<li>Manufacturer: Woodpecker</li>
<li>Content: A curing light.&nbsp;</li>
</ul>

Woodpecker LED B Curing Light

Diamond tips that exceed the requirements of ISO standards for rotary instruments 
Combination of strength and durability Microdont’s Diamond Tips are recognized for their excellent quality and built with a careful combination of selected materials to ensure exceptional performance in a variety of procedures.
<h2>Diamond Tips guarantee a safe, precise and vibration-free process</h2>
Microdont Diamond Tips are made of high-quality materials such as stainless steel and excellent diamonds. This combination provides strength, durability, ease of sterilization, cutting precision, wear and excellent performance during dental procedures. By using Microdont Diamond Tips, dental professionals can rely on reliable and efficient tools to achieve superior results in their procedures. 
<h3>High quality diamond</h3>
The diamonds are selected according to size, strength and shape and are added to the metal rods, providing a flawless surface and a more precise cut. 
<h3>Grain indication</h3>
The colored markings on the stems indicate their graininess. They come in yellow (extra-thin), red (thin), blue (medium), green (thick) and black (extra-thick). 
<h3>Stem with greater tolerance</h3>
Microdont Tips exceed the requirements of the ISO standards for diamond rotary instruments, featuring a shank with greater tolerance in its construction (1.592 ~ 1.598) 
<h3>Perfect centricity</h3>
The centricity of the diamond drill bit prevents further wear on the pen, providing greater resistance, durability and ease of use and maintenance.

Microdont BR-49 blue Diamond Bur

Diamond tips that exceed the requirements of ISO standards for rotary instruments 
Combination of strength and durability Microdont’s Diamond Tips are recognized for their excellent quality and built with a careful combination of selected materials to ensure exceptional performance in a variety of procedures.
Diamond Tips guarantee a safe, precise and vibration-free process
Microdont Diamond Tips are made of high-quality materials such as stainless steel and excellent diamonds. This combination provides strength, durability, ease of sterilization, cutting precision, wear and excellent performance during dental procedures. By using Microdont Diamond Tips, dental professionals can rely on reliable and efficient tools to achieve superior results in their procedures. 
High quality diamond
The diamonds are selected according to size, strength and shape and are added to the metal rods, providing a flawless surface and a more precise cut. 
Grain indication
The colored markings on the stems indicate their graininess. They come in yellow (extra-thin), red (thin), blue (medium), green (thick) and black (extra-thick). 
Stem with greater tolerance
Microdont Tips exceed the requirements of the ISO standards for diamond rotary instruments, featuring a shank with greater tolerance in its construction (1.592 ~ 1.598) 
Perfect centricity
The centricity of the diamond drill bit prevents further wear on the pen, providing greater resistance, durability and ease of use and maintenance.