Oraltronics KSA 

saudi arabia

■ 100% Synthetic Contains no tissue of human or animal origin therefore carries no risk of disease transmission. ■ Osteoconductive Act as a scaffold and support bone tissue regeneration. Similar to the mineral found in bone tissue. Powerbone polygonal granules have different particle sizes between 0.25-9 mm.
■ Bioresorbable With its optimized porous structure and chemical composition, Powerbone is suitable for the continuous remodeling cycle of healthy bone. ß-TCP resorbs over time and be replaced with bone during the healing process.
■ Safe, Biocompatible and Sterile Powerbone is supplied sterile and CE marked as a Class III Medical Device according to Directive 93/42/EEC.Powerbone is tested using: Pre-clinical studies, Biocompatibility tests (in vitro and in vivo). Biomechanical tests, Biodegradation tests, Bioburden and Sterility tests.
■ Radiopaque Could be detected via CT and X-ray.  &nbsp;

Powerbone Osteoconductive Granules (1-2 mm)

Powerbone / Bonegraft products are designed to repair bone defects caused by surgery or traumatic damage, increase bone growth in non-load-bearing clinical applications, or support the formation of new bone tissue. It can be mixed with bone marrow, blood and other clinically known bone grafts.
These products are used in trauma, orthopedics, spine and maxillofacial surgery.
Reasons to select Powerbone Dental Putty;
<ul>
<li style="margin-left:1.3em;">Minimal invasive surgical protocol</li>
<li style="margin-left:1.3em;">Easier and faster application</li>
<li style="margin-left:1.3em;">Ready to use</li>
<li style="margin-left:1.3em;">No mixing required</li>
<li style="margin-left:1.3em;">Enhance bone regeneration&nbsp;</li>
</ul>

Powerbone Dental Putty

Powerbone flexible strip is a bioresorbable synthetic bone graft that provides great hanling with high elasticity for specific cases including bone defects in the pelvis, extremities, and the posterolateral spine fusion.
Powerbone flexible strip is composed of silicate additive β-TCP and PLA based synthetic polymer.
Instructıons of Implanting Powerbone Flexible Strip; 
<ul>
<li style="margin-left:1.3em;">Powerbone Flexible Strip can be applied directly or combination with bone marrow aspirate/blood to the surgical site.</li>
<li style="margin-left:1.3em;">Wetting Powerbone Flexible Strip increases flexibility.</li>
<li style="margin-left:1.3em;">Place Powerbone Flexible Strip into the surgical site just before the closure of the surgical area once all metallic implants are stable.</li>
<li style="margin-left:1.3em;">Powerbone Flexible Strip can be cut to fit into a cage.&nbsp;</li>
</ul>

Powerbone Flexible Graft Strip

<h4 style="text-align:left;">About this Product:</h4>
<h3 style="text-align:left;">Designed for the healthy development of bone and periodontal support tissue.</h3>
Composed of a poly (lactic acid) based synthetic polymer that is biocompatible and resorbable with an excellent safety prole in medical applications.&nbsp;
<h3 style="text-align:left;">Application</h3>
The outer surface of the Powerbone Barrier Membrane, consists of a compressed (non porous) poly (lactic acid) (PLA) layer which is placed next to the soft tissue to exclude epithelial and broblast cells from the site.
The inner surface of the Bonegraft Barrier Membrane faces the bony surface and consists of porous poly (lactic acid) (PLA) microbers which induce mesenchymal stem cell retention proliferation and dierentiation.
The three-layered structure of Powerbone Barrier Membrane prevents the migration of epithelial and broblast cells, selectively supporting the healthy development of bone and periodental tissues. Powerbone Barrier Membrane preserves its structure for 10-12 weeks and is completely absorb.&nbsp;

Powerbone dental Membrane 15*20

<h4 style="text-align:left;">About this Product:</h4>
<h3 style="text-align:left;">This product is a non-eugenol protective material applied to intraoral wounds.</h3>
Ora-Aid is a new concept of pasting intra-oral patch to protect the affected area such as post implant, extraction, orthodontic, and ulcers. This new concept of pasting intra-oral wound dressing is designed to protect the affected area and aid natural healing.&nbsp;
<h3 style="text-align:left;">How it Works</h3>
<ul>
<li style="margin-left:0px;">Absorption of excessive exudate</li>
<li style="margin-left:0px;">Remains healing growth factors on the surface of the wound.</li>
<li style="margin-left:0px;">Protects wound from temperature variation</li>
<li style="margin-left:0px;">Protects wound from infection, external stimulus&nbsp;</li>
</ul>
<h3 style="text-align:left;">Features</h3>
<ul>
<li style="margin-left:0px;">Advanced concept in intraoral dressing</li>
<li style="margin-left:0px;">Protects intraoral wound from food, bacteria, and cigarette smoke</li>
<li style="margin-left:0px;">Aids in hemostasis</li>
<li style="margin-left:0px;">Protects suture thread from tongue irritation</li>
<li style="margin-left:0px;">Strong adhesion using hydrophilic polymer</li>
<li style="margin-left:0px;">Easy to cut into different shapes / sizes</li>
<li style="margin-left:0px;">Self adhesive with saliva</li>
<li style="margin-left:0px;">Reduces irritation sore in mouth safe and easy to use</li>
<li style="margin-left:0px;">Mint flavor reduces halitosis</li>
<li style="margin-left:0px;">Contains vitamin E&nbsp;</li>
</ul>

Oral Aid Wound Dressing ( 20 sticker 25*15)

DXP sealing machine

Super-fast Scanning  With a proven scanning time of 25 seconds for a single arch,* the IS 3800W’s capture speed frees up more time for focusing on patients.&nbsp;
A Smoother Scanning Experience With a field of view of 16 mm x 14 mm and a depth of field ranging from -2 to +16, the IS 3800W lets you capture the details you need—even in interproximal areas and subgingival margins.
&nbsp;&nbsp;Ultra-lightweight And Compact Weighing only 240 grams, the IS 3800W is one of the lightest and most compact intraoral scanners on the market and fits comfortably in your hand. Dynamic handpiece control: two buttons let you intuitively access IS 3800W functions.
&nbsp;&nbsp;



Limitless Indications Endless Possibilities Take a step to the next level of intraoral scanning with the newest version of IS ScanFlow software. Our acquisition software provides you with unlimited versatility and scalability to enable successful outcomes. And a new tiered software model means you get the freedom to choose the exact functionalities that will benefit your practice&nbsp;
The Freedom of Wireless Packed with Power Enjoy up to one hour of continuous scanning. The smart charging station, back-up power cable and optional extra batteries and charging unit ensure the scanner is always ready-for-use&nbsp;


Speed and Accuracy Super-fast Scanning With a proven scanning time of 25 seconds for a single arch,* the IS 3800W’s capture speed frees up more time for focusing on patients. A Smoother Scanning Experience The IS 3800W’s enlarged 16 mm x 14 mm field-of-view and significantly broader 21 mm depth of field capture the details you need—even in interproximal areas and subgingival margins. Comfortable and Easy to Use Ultra-lightweight and Compact Weighing only 240 grams, the IS 3800W is a light and compact intraoral scanner and fits comfortably in your hand. Dynamic Handpiece Control Two buttons let you intuitively access IS 3800W functions. Gesture Motion Control The IS 3800W handpiece features an embedded sensor that lets you orient the digital model on screen by simply rotating the scanner, eliminating the need to use the mouse. Simply move your hand and the model follows its movement so you can stay focused on your patient. Interchangeable Tips Three styles are provided to optimize scanning comfort. The tips can be autoclaved up to 110 times, reducing consumable costs and ensuring proper sterilization&nbsp;

DEXIS™ IS 3800W scanner

The DEXIS™ IS 3700 delivers a high-performance scanning experience that takes you in any direction you want, making compromise a thing of the past.&nbsp;

Shades of intelligence Patented smart-shade matching provides automatic selection and recording of shade information. 
Workflow freeflow Evolutionary new workflow lets users navigate freely among different clinical applications, including restorative, orthodontic, implant and sleep device.
Gripping curves An ergonomically optimal grip channel empowers oral health professionals with a balanced sense of scanner control. 
The added touch Touchscreen capability eliminates the extra steps of operation caused by switching back and forth between the scanner and the mouse.
Strapping in  The optional wrist strap connects user to the device for optimal control and care of the scanner.&nbsp;

DEXIS IS 3700 Scanner

<h2>Intraoral Scanner</h2>
The IS 3600 is a smarter way to scan.  
Delivering you a high-speed intuitive and highly accurate way to capture digital impressions.
<h1>The IS 3600 is your choice for clinical excellence. With intuitive and accurate scanning, you have the power to create vibrant, full HD 3D images-helping you achieve outstanding clinical results. The IS 3600 scans in a continuous and uninterrupted pattern making dual arch and quadrant imaging fast and easy for both you and your patients. With the IS 3600, the way you acquire digital impressions is truly made easy. <a href="https://kerrdental.com.br/produtos/dexis-is-3600/" target="_self"><ins>Dexis IS 3600</ins></a> </h1>

Dexis IS 3600 Scanner

Description
The Anycubic Photon Mono 4 Ultra takes resin printing to a new level. With its high-precision 10K monochrome screen technology, this printer enables razor-sharp details and impressive print results that will delight even the most demanding hobbyists. It offers an excellent balance between speed, precision and durability - ideal for anyone who wants to get the most out of their creative projects.
10K resolution
The precision of the Anycubic Photon Mono 4 Ultra has been increased by a fascinating 105%. With a display resolution of 9024 x 5120 pixels and an XY resolution of 17 x 17 µm, impressive details can be revealed.
COB light source + Fresnel lens
The Photon Mono 4 Ultra uses a combination of a COB light source with a Fresnel lens. This innovative technology ensures uniform light intensity within an angle of 3° and prevents the development of stray light.
Thanks to a light uniformity algorithm, a light uniformity of ≥ 90% and a printing accuracy of ± 0.1-0.05 mm can be achieved.
Latest generation of ACF film – better and faster
The Photon Mono 4 Ultra is equipped with an optimised ACF film with a special surface treatment. This new generation of ACF film minimises the matte texture to increase light transmission and enable a smooth release process.
Shorter printing times thanks to intelligent algorithms
The new ACF film is not the only thing that reduces printing time with the Photon Mono 4. With a series of cleverly thought-out algorithms, the resin printer saves up to 40% of your time and is guaranteed to increase your productivity by at least 100%!
► Dynamic light-off compensation: Mechanical sensors monitor the resin backflow rate, calculate the exposure area and optimally prepare the printer for each individual exposure layer.
► Dynamic release: By automatically detecting fluctuations in the release force, the lifting height of the printing platform can be dynamically adjusted for each layer. This can control problems such as bottom peeling or layer separation during large-scale release. On the other hand, for small-format models, unnecessary Z-axis movement can be reduced, the total printing time can be effectively shortened or the printing speed can be increased by 10-40%.
Intelligent assistance systems
With intelligent assistance systems, you are well prepared for each of your 3D printing projects:
► Failed Print Detection: If errors are detected, the 3D printer stops the printing process and informs you about possible damage to the model. This allows you to intervene as quickly as possible and save your prints in time.
► Resin Residue Detection: Thanks to a mechanical algorithm, resin residues in the resin container are automatically detected to prevent the display from breaking.
► Printer auto-inspection: The printer automatically performs a quick self-test and checks whether its individual components are functioning properly.
► Left over Resin monitoring: Before printing starts, it automatically checks whether the amount of resin in the container meets the printing requirements. If this is not the case, you will be reminded to refill the container with resin.
► Release Film Lifespan Management: This function counts how often the release film has been used. After around 30,000 uses, you will be reminded to replace the film in time.
Pre-calibrated and ready to use
The resin printer is delivered to your home assembled and pre-calibrated. Unpack it, start the efficient 4-point levelling and begin printing!
Additional features:
<ul>
<li style="margin-left:0.8rem;">4.3 inch HD touchscreen with new UI design for easy operation,</li>
<li style="margin-left:0.8rem;">Optionally, the resin printer can be equipped with an Activated Carbon Air Purifier to effectively adsorb odours that arise during printing,</li>
<li style="margin-left:0.8rem;">Anycubic Photon Workshop Slicer offers comprehensive support,</li>
<li style="margin-left:0.8rem;">Anycubic app for multi-device sync and cloud printing,</li>
<li style="margin-left:0.8rem;">Makeronline ecosystem where you can explore the imagination of other 3D printing enthusiasts, share your creations with the community and take part in exciting competitions or prize draws.&nbsp;</li>
</ul>

Anycubic Photon Mono 4 Ultra

<a href="https://store.anycubic.com/products/wash-cure-3" target="_self">The Anycubic Wash &amp; Cure 3</a> isn’t just a machine; it’s your shortcut to flawless 3D prints. Imagine spending less time cleaning and curing, and more time enjoying your amazing creations. This powerful tool removes the hassle from post-processing, ensuring your models are clean, strong, and ready to show off. Say goodbye to messy cleanups and uneven curing, and hello to professional-quality results, right at your fingertips.
Maximize Efficiency with Advanced Wash &amp; Cure Technology
Time is precious, and the Anycubic Wash &amp; Cure 3 is designed to save you plenty of it. Its innovative 2-in-1 design combines washing and curing in a single, streamlined process. The larger cleaning volume and adjustable features mean you can process more prints at once, while using less cleaning solution. The upgraded curing system, with its unique gooseneck light, ensures every detail of your model is cured evenly and thoroughly. It’s the smart way to get more done, faster.&nbsp;

Anycubic Wash &Cure 3

Description

With intelligent assistance systems and innovative core algorithms, the Photon Mono M7 Pro from Anycubic is starting a new era in 3D printing. Thanks to the sophisticated combination of advanced machine intelligence and finely tuned processes, the resin printer accompanies you with precise accuracy and outstanding speed throughout your entire printing process.
Simple, elegant design
The Photon Mono M7 Pro shines in a minimalist OneBox housing design. Its smooth lines underline the geometric appearance, a combination of grey and orange tones attracts all eyes.
Creativity-promoting build volume
With a build volume of 223 x 126 x 230 mm, you can push the limits of your creativity with ease!
Light Turbo 3.0 lighting system &amp; 14K display
The resin printer uses the new Light Turbo 3.0 light system in combination with a high-resolution 14K screen. The result: an overall better performance of the light source and faster curing of the printed model layers.
The 14K screen has a resolution of 13312 x 5120 pixels and an XY resolution of 16.8 x 24.8 µm. This allows you to print detailed and complex structures with the highest precision and sharpness of detail as well as with a beautiful surface quality.
COB light source with forward-facing reflectors
The Photon Mono M7 Pro uses a new optical design solution consisting of a COB light source with forward-facing reflectors. The technology ensures uniform light intensity within an angle of ≤ 3° and avoids the generation of stray light.
Thanks to a light uniformity algorithm, a light uniformity of ≥ 90%+ and a printing accuracy of ± 0.1-0.05 mm can be achieved. A special light-off algorithm can dynamically adjust the light-off time of the light source under the display according to the exposure area of ​​the printing model as well as the resin flow rate in order to fully expose each individual layer of the model.
Higher speeds to success
By integrating smart algorithms, 10-40% higher printing speeds are ensured. When using a standard resin, speeds of up to 130 mm/h can be achieved, while with high-speed resin the printer can even work at speeds of up to 170 mm/s.
Resin vat with dynamic temperature control
The resin tank with dynamic temperature control has a peristaltic pump and a heater. A special circulation channel ensures that the resin in the tank circulates continuously and is kept at the optimal temperature.
►Depending on requirements, the resin is either heated or cooled, with an optimal temperature of 25 °C being aimed for.
► In circulating motion, the resin needs about 20 minutes to warm up from 5 °C to 25 °C.
The practical thing about the dynamic temperature control: Before printing, the real-time temperature of the resin is measured by an automatic sensor so that it can be adjusted according to the printing requirements. The temperature of the circulating resin is also constantly monitored during the printing process. The adjustable temperature means that a variety of resins with different viscosity levels can be used.
Automatic Resin Management System
In order to simplify the handling of the resin as much as possible, the resin printer has an automatic mechanism for supplying the resin or for pumping it out after printing has finished.
Thanks to the automated device, the printer is continuously supplied with resin during the printing process. The remaining resin is pumped back at the touch of a button after printing is finished or “recycled” for later use. This saves you time-consuming cleaning and of course, saves you money!
Included AirPure air purifier
The Anycubic AirPure air purifier has a built-in, easily replaceable activated carbon filter that can effectively absorb and filter up to 99% of VOCs as well as unpleasant resin odours.
Automatic levelling
The resin printer is ready to use Sense. The device is automatically and precisely levelled to “zero”, eliminating the need for manual levelling.
Intelligent assistance systems
With intelligent assistance systems, you are well-prepared for each of your 3D printing projects:
► Failed Print Detection:
If errors are detected, the 3D printer stops the printing process and informs you about possible damage to the model. This allows you to intervene as quickly as possible and save your prints in time.
► Release Film Lifespan Management:
This function counts how often the release film has been used. After around 45,000 uses, you will be reminded to replace the film soon.
► Resin Residue Detection:
Thanks to a mechanical algorithm, resin residues in the resin tank are automatically detected to prevent the display from breaking.
► Resin Level Detection:
Before printing begins, the system automatically checks whether the amount of resin in the container meets the printing requirements. If this is not the case, you will be reminded to refill the container with resin.
► Platform Installation Status Detection:
This function checks the status of the build platform. If there are any abnormalities, you will be informed in a timely manner.
► Component Connection Status Detection:
The printer automatically performs a quick self-test to ensure that its individual components are functioning properly.
Simplified slicing process
With the Photon Mono M7 Pro, even slicing is a lot of fun:
<ul>
<li>The slicer supports slicing models and saving draft files anytime, anywhere.</li>
<li>Thanks to a special algorithm (vector slicing), a sliced ​​model file is compressed so that it does not take up too much storage space on the device when the model is transferred.</li>
<li>With the built-in multi-task management, you can track the printing status of multiple printers in real-time and manage them as needed.</li>
<li>An auto repair function shows you which defects and how many there are in your model file and repairs them automatically so that you can complete your printing process with complete success.</li>
</ul>
Makeronline Community
Explore the imagination of other 3D printing enthusiasts, share your creations with the community and take part in exciting competitions or prize draws.
Additional features:
<ul>
<li>Easy-to-use, ergonomic, touch-sensitive 5-inch touch display;</li>
<li>For efficient heat dissipation and stable operation, strong cooling grills are distributed on several sides of the base.&nbsp;</li>
</ul>